Anodyne Electronics Manufacturing SM40 Especificaciones descargar pdf (Pagina 38)

AMS42/AMS44 Dual Channel Audio Controller

SM19 Installation and Operation Manual

May 29, 2012 Rev: 5.00 Page 3-9

ENG-FORM: 806-0100.DOTX

CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.

3.9.1.3 TX Selector Example

In the figure that follows, the positions of the rotary selector switches indicate that the left and right sides of the

controller are set for transmit operation on the AUX FM transceiver.

Both Transmit Selectors at AUX FM

3.9.2 Hand Microphone

The hand mic functions without power and will work in emergency or equipment failure situations. The

hand mic normally functions on the left side of the controller but can be connected to the right side at the

time of installation by changing an internal switch.

When the hand mic or transmit PTT switch is activated, the mic involved will be coupled to the radio (or PA)

selected. The TX annunciator will not light when the hand mic is used.

3.10 AMS44 - Transceiver Receive Functions

3.10.1 Receive Selection Switches

The Receive Audio select switches (white switch bats) are ‘center-off’ type with the ‘up’ position selecting

the respective navaid receiver audio, and the ‘down’ position selecting the respective transceiver audio.

See section 3.10.3.1 for RX volume control.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43

Sin comentarios

Anodyne Electronics Manufacturing SM40 Especificaciones Pagina 38