Anodyne Electronics Manufacturing SM40 Especificaciones descargar pdf (Pagina 32)

AMS42/AMS44 Dual Channel Audio Controller

SM19 Installation and Operation Manual

May 29, 2012 Rev: 5.00 Page 3-3

ENG-FORM: 806-0100.DOTX

CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.

3.4 AMS42 - Transceiver Receive Functions

3.4.1 Receive Selection Switches

The receive audio is selected by switching any of the RX switches (white switch bats) UP to connect the

indicated radio to the headphone bus. The AUX position does not have a separate RX switch and is

connected to the headphone bus by rotating the TX selector to the AUX position. See section 3.4.3.1 for

RX volume control.

3.4.2 Transceiver Selection Examples

In the figure below, the right side TX selector is set for transmit and receive operation on COM2. The

Receive function switches are also selected so the right side can monitor COM1 and FM2 transceivers.

Note that FM1 is not selected and AUX cannot be selected by the RX switches.

RX Switches at COM1 and FM2

TX Selector at COM2

In the figure below, the right side configuration remains the same. The left side is set up to receive and

transmit on FM1 while monitoring the COM2 transceiver. Note that COM1 and FM2 are not selected on

the left side.

TX Selector at FM1

RX switch at COM2

Volume Controls

(RX and ICS VOL)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 42 43

Sin comentarios

Anodyne Electronics Manufacturing SM40 Especificaciones Pagina 32