Anodyne Electronics Manufacturing SM40 Especificaciones descargar pdf (Pagina 14)

AMS42/AMS44 Dual Channel Audio Controller

SM19 Installation and Operation Manual

May 29, 2012 Rev: 5.00 Page 2-4

ENG-FORM: 805-0100.DOTX

CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.

2.5.1.2 DIR AUDIO Inputs

These are coupled directly to either the Right User (P) or Left User (C) of the controller

by jumpers accessible through the top cover and labeled DIR AUDIO #1 or DIR AUDIO

#2. The factory setting is for coupling to the Right User.

P C

Couplings for DIR AUDIO #1 Couplings for DIR AUDIO #2

2.5.1.3 Intercom Isolation (ICS ISO)

The front panel mode switch can be used to isolate either the left (copilot) or right (pilot)

user by using the jumper labeled ICS ISO, which is accessible through the top cover. It is

normally set for isolation of the right user when the unit is shipped from the factory.

C P

2.5.2 Right Side Adjustments

2.5.2.1 Sidetone (LEFT USER S/T and RIGHT USER S/T)

The Left User and Right User transmit sidetone (S/T) can be adjusted using the pots

accessible through the right side of the case. Rotating the pots clockwise increases the

sidetone, and counterclockwise reduces it.

2.5.2.2 ICS TIE LEVEL

This factory-preset pot may be covered by an adhesive disc to prevent field adjustment.

Under normal operation this pot does not need to be adjusted. Any adjustment

should be carried out by qualified personnel only!

o o o

Coupled to

Left User

Coupled to

Right User

Coupled to

Right User

Coupled to

Left User

o o o

Coupled to

Left User

Coupled to

Right User

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Sin comentarios

Anodyne Electronics Manufacturing SM40 Especificaciones Pagina 14