Anodyne Electronics Manufacturing SM40 Especificaciones Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
AMS42/AMS44 Dual Channel Audio Controller
SM19 Installation and Operation Manual
May 29, 2012 Rev: 5.00 Page 3-2
ENG-FORM: 806-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
3.3 AMS42 - Selection of Transmit Functions
Left User (Co-pilot)
Transmit Selector
Transmit
Annunciator
Right User (Pilot)
Transmit Selector
Transmit
Annunciator
3.3.1 Transmit Selectors
The transmit selector controls are six position rotary switches, one on each side of the panel to
correspond to the user on that side of the aircraft. The controls select the transmit function required by
the relevant user. Each rotary selector switch is completely independent of the other, and the pilot and
copilot have equal priority during transmit. When the PTT is activated, all audio selected on the side of
the controller that is transmitting is muted, except the sidetone of the transceiver in use.
3.3.1.1 Automatic Receive Audio
Receive audio is automatically selected as a function of the respective rotary selector switch. No
additional switching is needed to establish external communication.
3.3.1.2 Transmit Annunciators
During transmit from either the pilot or copilot position, the appropriate TX annunciator (green) will light on
the front panel.
3.3.1.3 TX Selector Example
In the figure above, the positions of the rotary selector switches indicate that the right side of the controller is
set for transmit and receive operation on the COM2 transceiver while the left side of the controller is set for
transmit and receive operation on the FM1 transceiver.
3.3.2 Hand Microphone
The hand mic functions without power and will work in emergency or equipment failure situations. The hand
mic normally functions on the left side of the controller but can be connected to the right side at the time of
installation by changing an internal switch. When the hand mic or transmit PTT switch is activated, the mic
involved will be coupled to the radio (or PA) selected. The TX annunciator will not light when the hand mic is
used.
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Comentarios a estos manuales

Sin comentarios