Anodyne Electronics Manufacturing AA83-001 Especificaciones descargar pdf (Pagina 9)

AA83-001 InterMUSIC™ Stereo Intercom System

SM09-2 Installation and Operation Manual

April 17, 2012 Rev: 5.00 Page 2-1

ENG-FORM: 805-0100.DOTX

CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.

Section 2.0 Installation

2.1 Introduction

Information in this section consists of: unpacking and inspection procedures, installation procedures,

post-installation checks, and installation drawings.

2.2 Unpacking and Inspection

Unpack the equipment carefully. Inspect the unit visually for damage due to shipping and report all such

claims immediately to the carrier involved. Note that each unit should have the following:

- AA83-001 InterMUSIC™

- Product Information Card

- Release certification

- Installation kit (Section 2.5)

Verify that all items are present before proceeding and report any shortage immediately to your supplier.

2.2.1 Warranty

All Anodyne Electronics Manufacturing Corp. (AEM) products are warranted for 2 years. See the website

www.aem-corp.com/warranty for complete details.

2.3 Installation Procedures

2.3.1 Warnings

Do not bundle any lines from this unit with transmitter coax lines. Do not bundle any logic, audio, or DC

power lines from this unit with 400 Hz synchro wiring or AC power lines. Do not position this unit next to

any device with a strong alternating magnetic field such as an inverter, motor or blower, or significant

audio interference will result.

2.3.2 Cautions

In all installations, use shielded cable exactly as shown and ground as indicated. Significant problems

may result from not following these guidelines.

All audio installations can be seriously degraded by incorrect wiring and shielding, and may result in

abnormal cross-talk, hum and ground-loop noise. Be especially careful with all microphone wiring and

Tie Line wiring, as these lines carry the lowest level signals in the aircraft.

All microphone and headset jacks should be electrically isolated from the airframe or significant ground

loop noise may result.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Sin comentarios

Anodyne Electronics Manufacturing AA83-001 Especificaciones Pagina 9