
AA83-100 InterMUSIC
™
Stereo Intercom System
SM09-3 Installation and Operation Manual
April 18, 2012 Rev: 5.00 Page 3-5
ENG-FORM: 806-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
3.3.8 Automatic Fail-safe
In the event of a power failure, automatic fail-safe operation will be activated. This routes the pilot’s
phones, mic audio, and mic PTT directly to the COM radio. Copilot and passengers will have no ICS,
music, or receive functions.
The pilot mic is directly connected to the transceiver mic. Mic bias is provided by the transceiver, not the
AA83-100. The pilot TX keyline is directly connected to the transceiver.
During receive mode, receive audio is directly connected from the audio source to the pilot phones, and
during transmit mode, the sidetone audio is directly connected from the audio source to the pilot phones.
In both cases, copilot and passengers have no ICS, music, sidetone, or receive functions.
In the unlikely event of an AA83-100 circuit failure that results in a communication problem, the automatic
fail-safe mode can be enabled by pulling the AA83-100 circuit breaker.
Note: In Automatic Fail-Safe mode, the receive/sidetone levels may require adjustment at the audio
source.
The pilot should confirm that all aspects of Automatic Fail-Safe operation are working before
accepting the aircraft into service.
End of Section 3.0
Comentarios a estos manuales